Logger logo Logger Sensor Logs
+91 92156 00374 Open the app

IoT loom monitoring for weaving mills

Loom monitoring system for weaving mills. Every pick, logged live.

A sensor on every loom, production in the cloud, and one app for your whole team — live loom RPH, stops, hourly production, warp beam tracking and a shop floor TV dashboard. On Android and the web.

Open the app
  • Readings every minute
  • Android & web
  • TV dashboard, no login
1 sensorper loom — IoT on Wi-Fi
Every minutecounter and running / stopped status
Per day, per beamcut at your shift start, not midnight
App + TVAndroid, web and the shop floor screen

How it works

Weaving production monitoring in three steps: sensor, cloud, screen

No server at the mill, no registers, no end-of-shift counting. The loom reports itself.

  1. 1 IoT loom sensor IoT Wi-Fi sensor to loom

    The sensor posts

    An IoT sensor on each loom sends its counter (picks or metres) and running / stopped status over Wi-Fi about every minute. A retry never double-counts.

  2. 2 Logger cloud per loom per beam per hour, day

    Logger works it out

    Every reading becomes production — per loom, per hour, per production day and per beam on the loom. Counter restarts and bad readings are handled.

  3. 3 App and TV dashboard

    Your team sees it

    Managers on their phones, supervisors on the web, weavers on the big TV on the shop floor. Everything keeps itself up to date.

Features

Everything between the loom sensor and the production report

Built for the people who run the floor: the numbers that matter this hour, and the history behind them.

Live dashboard

Production today against the day before, looms running, beams on loom and ready, and sensors online.

Loom RPH gauges

An RPH dial per loom for the last hour, an odometer totaliser and beam counter, stops and time stopped.

Hourly production charts

Production hour by hour for the last 24 hours — see the shift change, the breakdown, the slow hour.

Daily reports & CSV

Output per loom per day for any range, with loom and day totals. Export it as CSV in one tap.

Warp beam tracking

Warping beam batches, rollouts onto looms and each beam's progress in percent — ready, on a loom, or done.

Shop floor TV dashboard

Full screen, black and vivid. Rotates live gauges and hourly charts, and opens from a TV link with no login.

Android & web app

The same app on a phone, a tablet by the loom and a browser in the office, from one sign-in.

Sensors & readings

Every sensor, when it last reported and the raw readings behind any number — restarts handled.

Managers & viewers

Managers add looms, beams and rollouts; viewers watch. Every company only ever sees its own mill.

Many mills, one account

Each mill is its own company with its own shift start. Switch between them in the app.

Login log & audit trail

Who signed in, and who changed what and when — for every loom, beam and rollout.

Sync API for ERP & payroll

Your ERP or payroll software pulls readings through a sync API that remembers where it left off.

Gauges & reports

Loom RPH monitoring, hour by hour

RPH is what a loom produced in the last hour. Logger puts it on a dial for every loom, next to the stops in that hour and how long the loom stood still — so a slow loom shows up now, not at the end of the shift.

  • Gauges view — RPH dial, odometer-style totaliser and beam counter per loom.
  • Hourly charts — production for each of the last 24 hours, for the mill or one loom.
  • Daily reports — per loom per production day, with CSV export.

Shop floor TV dashboard

Put the whole shed on the big screen

A shop floor TV dashboard in full screen, black with vivid colours, readable from across the shed. It rotates between live loom gauges and hourly performance charts on its own — and opens from a TV link, with no login.

  • Readable across the shedBlack screen, big numbers, a colour per loom, red for a stopped one.
  • Rotates on its ownLive gauges, then hourly performance charts, then back again.
  • A TV link, no loginA manager creates the link in the app; the TV browser opens it.

The loom workflow

Warp beam tracking, from warping to rollout

The way a weaving shed already works, without the register.

  • Warp a beam — record the batch: beam number, quality, ends and length.
  • Roll it onto a loom — pick the loom and the time. Whatever was on it hands over.
  • Watch it run — its output grows reading by reading, with progress against the beam length.
  • Next beam takes over — the moment the next rollout starts, the old beam is done and totalled.

One app, everywhere

Your mill in your pocket — Android and the web

  • Dashboard, gauges, hourly charts, looms, beams, rollouts, reports and sensors
  • A desk layout with a sidebar on tablets and computers, tabs on phones
  • Sign in with your email; managers edit, viewers watch
  • The Android APK and the web app share one sign-in
Open the web app Admin sign in

Sensors

An IoT production counter on every loom

One small IoT sensor per loom counts production and reports running or stopped over your Wi-Fi. Logger shows every sensor, when it last reported, and the readings behind every number.

  • Picks or metres — any machine with a counter can be logged.
  • About every minute — readings are stored in the cloud, not on a PC at the mill.
  • Safe retries — a reading sent twice is counted once; counter restarts are handled.

For the people wiring it up

A plain HTTP API at both ends

Devices post JSON — one reading or a whole cycle — with the sensor ID and the time. Your ERP or payroll software pulls readings out through a sync API that remembers where each one left off. 

POST https://logger.jet66.cloud/v1
Content-Type: application/json

{
  "readings": [
    { "sensor_id": "10001", "reading1": 452,
      "reading2": 188233, "status": "running",
      "ts": "2026-09-11 10:15:00" }
  ]
}

For mill owners

Loom efficiency software for weaving mills in India

You can't fix a stoppage you never hear about. Logger makes every loom tell you, every minute.

Catch stops early

Stops in the last hour and time stopped, per loom — spot the silent loom while the shift is still on.

Retire the register

Production is counted by the machine, not written down at the end of the shift.

Plan beams ahead

Beam progress in percent shows which loom needs the next beam, and which beams are ready.

Your mill from anywhere

Check the shed from home, the office or on the road — on your phone.

A floor that sees itself

The TV dashboard puts every loom's RPH in front of the people running them.

Numbers you can trust

Hourly and daily history per loom and per beam, exportable as CSV for your own analysis.

Industries

Made for weaving. Works wherever a machine counts.

Weaving mills

Power loom sheds and modern weaving units — picks per loom, per hour, per beam.

Warping & beam planning

Warping beam batches, rollouts and beam progress, tied to the looms they run on.

Textile groups

Several mills or sheds, each as its own company, managed from one account.

Any counter-based machine

If a sensor can count its output, Logger can log it — running, stopped, per hour and per day.

FAQ

Questions mill owners ask

Anything else? Ask us on WhatsApp or call +91 92156 00374.

What is Logger?

Logger is a loom monitoring system for weaving mills. A small IoT sensor on each loom sends its pick or metre counter and its running or stopped status to the cloud about every minute. Your team sees live production, loom RPH, stops and beam progress in the web app, the Android app and on a shop floor TV dashboard.

What hardware do I need on each loom?

One IoT sensor per loom, on your mill Wi-Fi. It counts production (picks or metres) and reports whether the loom is running or stopped. Nothing else needs to be wired to the loom, and no server is needed at the mill.

Which looms and machines does it work with?

Logger works from a counter, so it suits weaving looms and any other counter-based machine where the sensor can count output. Tell us your loom model on a call or on WhatsApp and we will confirm the fitting.

What is loom RPH and where do I see it?

RPH is the production of a loom in the last hour. The gauges view shows an RPH dial for every loom, an odometer-style totaliser and beam counter, the number of stops in the last hour and the time the loom was stopped. Hourly charts cover the last 24 hours.

Can I show live production on a TV on the shop floor?

Yes. The shop floor TV dashboard is full screen, black and in vivid colours, and it rotates between live loom gauges and hourly performance charts. A manager creates a TV link in the app; the TV opens that link in its browser with no login.

Is there a mobile app?

Yes. The company app runs on Android (APK) and in any web browser at logger.jet66.cloud/app/, with the same sign-in. Managers add looms, beams and rollouts; viewers watch production.

How does warp beam tracking work?

Record each warping beam batch, then roll a beam onto a loom at a date and time. Logger counts the production against that beam and shows its progress in percent, and the next rollout on the loom closes it off. You always see which beams are on looms and which are ready.

How do I get started?

Call or WhatsApp us on +91 92156 00374 with the number of looms in your mill. We will explain the sensors, the set-up and the pricing, and show you the app with demo data.

Contact

See Logger on your looms

Call or WhatsApp us with the number of looms in your mill. We'll walk you through the sensors, the set-up and the app — with demo data, before a single sensor is fitted.

Call +91 92156 00374
PhoneCall us WhatsAppChat with us
Good to have ready

Number of looms · loom type · Wi-Fi on the shop floor

Already using Logger?

Open the app · Admin sign in